by Reashad Hossain | Sep 21, 2024 | Networking
ISAKMP Phase 1 (IKE) This is a 2-step process:1. configure ISAKMP policyIKE configuration (ISAKMP policy) is universally applicable. That means this set of configurations will be tried with every IPSec peer this router has.2. Define Peer router IP with a pre-shared...
by Reashad Hossain | Aug 9, 2023 | Networking
If you use a Non-Cisco SFP on a Cisco switch or router, then you can potentially take down the entire network. When it happens, you will see that the entire line module is down or in other words, all the ports in that line module will go under err-diable state. Yes,...
