Configure Cisco FlexVPN with AnyConnect

Configure Cisco FlexVPN with AnyConnect

Configuration on Cisco It is a 7-step process on a Cisco router. The steps are: Turn ON HTTP server on R1 Turn R1 into a CA so that it can create client certificates Create client certificate on R1 Configure AAA Configure IKEv2 Configure IPSec Create virtual-template1...

Site to Site Cisco IPSec tunnel

ISAKMP Phase 1 (IKE) This is a 2-step process:1. configure ISAKMP policyIKE configuration (ISAKMP policy) is universally applicable. That means this set of configurations will be tried with every IPSec peer this router has.2. Define Peer router IP with a pre-shared...

Using Non-Cisco SFPs on a Cisco router switch

If you use a Non-Cisco SFP on a Cisco switch or router, then you can potentially take down the entire network. When it happens, you will see that the entire line module is down or in other words, all the ports in that line module will go under err-diable state. Yes,...

Private IP address space

RFC 1918 Address Allocation for Private Internets February 1996 3. Private Address Space The Internet Assigned Numbers Authority (IANA) has reserved the following three blocks of the IP address space for private internets: 10.0.0.0 – 10.255.255.255 (10/8 prefix)...